Features
LFYP-50 vane pump, built in air separator,by pass valve,filter, is with three different top covers for different connecting pipes. A type, B type, and C type.
With the advantage of low noise, high flow rate, long life sevice, etc. Technical Specifications:
1.Speed: 630rmp
2.Flow Rate: 45L/min to 65L/min
3.Vacuum: ≥0.054MPa
4.Noise: ≤72dB
5.Working Pressure: 0.16 to 0.25MPa
6.Package: 1pcs/carton
7.Net Weight: 17kg
8.Gross Weight: 17.5kg
9.Dimension: 340×260×370mm
Features
LFCP-90 gear pump, whose material of body is alloyaluminum founded under low pressure, is applicable to gasoline,kerosene, diesel oil and compound of them.
Air separator, by pass valve,check valve, inlet and outlet strainer, decompression are built in.
Technical Specifications:
1.Speed:680 to 980 rmp
2.Flow Rate:45L/min to 90L/min
3.Vacuum:≥0.06MPa
4.Noise:≤72dB
5.Working Pressure:0.18 to 0.3MPa
6.Package:1pc/carton
7.Net Weight:17Kg
8.Gross Weight:17.5Kg
9.Dimension:360*320*300mm
Features
LFTP-80 and LFTP-50 gear pump, made by cast iron, is applicable to gasoline, kerosene, diesel and gasohol with A type and B type inlets and air seprator, by pass valve, check valve, inet filter are built in. Technical Specifications:
1.Speed: 900rpm
2.Flow Rate: 75L/min to 85L/min
3.Vacuum: ≥0.06MPa
4.Noise: ≤72dB
5.Working Pressure: 0.18 to 0.24MPa
6.Package: 1pcs/carton
7.Net Weight: 37kg
8.Gross Weight: 42kg
9.Dimension: 400×300×280mm
Features
Consist of bypass valve; liquid is drawn by rotors with sliding vane blades, the material of constructon is nodular iron with sliding vanes built in a special self lubricating material. Due to its efficiency the pumps can handle viscous and volatile liquids and require less horsepower than other equivalent pumps. The pumps are capable of higher flow rates at lower number of revolutions than other design.
